#Serial gps pathfinder office how to#
#Serial gps pathfinder office install#
#Serial gps pathfinder office software#

The software will connect to the handheld automatically. Make the physical connection using a USB cable.Start icon –> Settings –> Connections –> USB to PC Make sure the USB to PC option “Enable advanced network functionality” in Geo 7x is NOT checked.

#Serial gps pathfinder office how to#

How to connect Geo 7x with a Windows desktop computer? Installation of Windows Mobile Device Center and device setup after the initial connection are not addressed here. As of May 2019, the latest Windows Mobile Device Center was released in 2012 and needs some tweaks to work with Windows 10.

#Serial gps pathfinder office install#

To connect a Windows mobile device like Trimble Geo 7x with a Windows desktop computer, you need to install Windows Mobile Device Center on the desktop. Pathfinder Office runs on Windows desktop. There is also no transformation between WGS 1984 and ITRF 2000. In the examples below, the transformation parameters indicate Pathfinder Office does not apply datum transformation when moving positions referencing the WGS 1984 datum to the NAD 1983 (Conus) datum.

Click the datum in question on the left pane, then right-click the transformation associated with the datum on the right pane and click “Properties” to see datum transformation parameters.

Click the “Utilities” menu –> “Other” –> “Coordinate System Manager”.

To learn if Pathfinder Office performs a datum transformation between WGS 1984 and a different datum: If your positions are post-processed in Pathfinder Office, the positions reference the datum of correction source. TerraSync transforms incoming positions to the datum used by the correction source and back to the WGS 1984 datum after positions are corrected.

If your positions are corrected real-time using an external correction source that references a different datum and the datum of the correction source is specified in TerraSync, the corrected positions references the WGS 1984 datum. See tab “Exporting Positions” for details): The shift can be as much as 1 meter (3.5 feet), as shown in the graphic below (Note, positions corrected using CORS station position from base file reference the NAD 83 (2011) datum positions corrected using CORS station position from base station list reference ITRF 2000. In the above example, if you set output coordinate system datum NAD83 (2011), Pathfinder Office will apply a WGS1984-to-NAD83 (2011) transformation to the output positions and result in a position shift in the output. After position export is completed, use the “Define Projection” tool to define the correct datum for the output GIS data file (NAD83 (2011)). the “Define Projection” tool in ArcGIS software, to enter the correct map projection information in the exported GIS file.įor example, if your *.cor file (corrected position file) reference the NAD83 (2011) datum, set output coordinate system datum ITRF 2000 (as of August 2019). After position export is completed, use GIS software tool, e.g. If your positions reference a datum that is not WGS 1984 or the comparable ITRF, specify an output datum in position export setup that will not trigger a datum transformation. As a result, you cannot work with map projections in Pathfinder Office the same way as in professional GIS software. When exporting position files, Pathfinder Office treats input positions (*.SSF, *.cor) as referencing the WGS 1984 datum, even if the positions actually reference a different datum, e.g.